|
|
| |
3.1. Is the watch full, solid stainless steel? Or is it stainless steel coated?
All too often replicas are stainless steel coated, so after some wear, the stainless steel wears off, showing the brass or aluminum body, which makes the replica completely useless then. ALWAYS INSIST on full, solid stainless steel replicas. At our websites, we only sell the highest quality full, solid stainless steel replicas.
3.2. Is the glass sapphire crystal? Don't settle for less than scratch resistant sapphire crystal. How do you tell?
Run a sharp penknife across the dial when you receive the watch - if it scratches , return it - it is simply not worth the money. Here at our website, all our top quality timepieces come with scratch resistant sapphire crystal, exactly like the originals which retail for tens of thousands of dollars.
3.3. Does the watch have screws in the links, or pins?
Most replicas have watch links which are linked by cheap pins, which require hammering out, just adjust the links. Don't be fooled either by pins that are folded, and resemble screws. Solidly built, high quality replicas should have threaded screws in the links, not pins - exactly as per genuine Rolex timepieces. These can be nicely removed with a small screw-driver to adjust for band size.
3.4. Does the watch have the hack mechanism?
All automatic movement watches from Breitling, Rolex etc, when the crown is pulled out to set/adjust the time, the second hand stops moving - this is known as the hack mechanism. This feature is almost never found on replicas, and is usually a dead giveaway for a replica. Only high quality replicas have the hack mechanism - but you don��t have to pay a fortune to get one, as all timepieces on our website have the hack mechanism!
3.5. Do your Rolex replicas have a solid stainless steel back, with the green Rolex hologram sticker?
Rolex replicas with the see-through, glass back, are another dead giveaway. Genuine Rolex watches have a solid stainless steel back, with the green Rolex sticker with model number and logo - don't settle for anything else!
3.6. Do your Rolex replicas have the serial number/band number on the last link?
Serial and band model number should be found on the final links/last piece of any Rolex replica, exactly as found on genuine Rolexes. Unfortunately, most replicas don't have that - but ours do.
3.7. How do I set time?
To set time, you need to turn button in anti-clockwise direction if you have a screw-in lock watch. You need to softly pull the button out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the button out with as little force as possible. You can feel a little " click" ! Now you can set the time by turning it anti-clockwise. This would turn the minute-hour hands forward until you set the right time. When time is set, push the button back and turning the button clockwise for a few rounds.
3.8. I have a watch with a date indicator, how do I change the date?
To change date and time you need to do the following. If you have a screw-in button like Rolex, you need to turn the button anti-clockwise for a few rounds until the button is loose. Then you need to pull the button out softly by using your thumb nail and first finger nail. You should feel a " click" here. There are two steps when you pull the button out. The first step is for setting the date (and Day if you have a Rolex Day-Date). The second step is for setting the local time. You can only set Date forward by turning button in one direction. When you are done with setting date and time, push back the button and wind it clockwise for a few times.
3.9. What other standard features can I expect to find in your top quality replica watches?
When purchasing a replica, aside from all the above features, which help distinguish a good replica from a bad one, all replicas should have the following standard features:
*Screw-in crown
*unidirectional turning bezel where appropriate
*All the appropriate Rolex logos, on crown and dial
*Heavy weight
Our top quality range of replicas answers a resounding YES!! to all the above questions about quality. Other websites will tell you that to have all the above, the watch will sell for $600-$800 - that is USUALLY true, but at our websites, we are wholesalers in direct contact with the manufacturers, and we slash our profit margins, to bring you the top quality replicas at WHOLESALE prices. We don't just say it - we GUARANTEE it.
3.10. What is the warranty on your watches?
We guarantee the quality of our watches. For your defective watch within 90 days from the day you receive the watch, you can contact with our customer service to request a replacement. Defects include mechanical and battery problems, and do not include water damage or man-made damages by the customer. Also you have the right to claim full refund for any dissatisfied products received. Our service staffs will give first priority to solve these types of problem.
|
|